TRENDnet User’s Guide Contents Product Overview .................................................................................. 3 Package Contents .......................................................................................................... 3 Features ......................................................................................................................... 3 Table of Contents Maintenance ........................................................................................
TRENDnet User’s Guide Table of Contents FTP Server ........................................................................................................................................ 45 Pan/Tilt/Zoom (PTZ) Settings ....................................................................................... 46 Basic ................................................................................................................................................ 46 Limit ......................................
TV‐IP450PI TRENDnet User’s Guide Features Product Overview TV‐IP450PI TRENDnet’s Outdoor 1.3 MP HD PoE IR Speed Dome Network Camera, model TV‐IP450PI, offers powerful 20x optical zoom, 100 m (330 feet) night vision, an IP66 weather rating, and continuous 360 degree PTZ functionality. Record 1.3 Megapixel HD video (1280 x 960) at 30 fps in a space saving H.264 compression format. Manage up to 32 TRENDnet cameras with included complimentary software and mobile apps.
TV‐IP450PI TRENDnet User’s Guide Tamper Detection Cables Receive tamper detection snapshots via email, ftp, or save to Samba client or Micro SD card D‐WDR Connectors for AC power adapter Improved image quality and autofocus in high contrast lighting environments with Digital Wide Dynamic Range technology (Not required when PoE injector is included) Motion Detection Create motion detection windows with separate sensitivity settings and event triggers Recording Schedule Define a weekly recording schedu
TV‐IP450PI TRENDnet User’s Guide Warnings: It is recommended to use the PoE+ injector that comes with the camera or an IEEE 802.3at compliant PoE+ switch. If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the camera yourself. Disassembling the product will void the warranty and may cause harm or injury.
TV‐IP450PI TRENDnet User’s Guide Sunlight: Avoid direct sun light exposure. Direct sun light will damage the image sensor. If sunlight is necessary for your viewing purposes, provide protection for the image sensor. Lighting: Consider installing your camera faces the same direction of the light sources. Shooting images with top‐down position outdoor or next to the existing light source are good choices. Avoid the light source if it creates a shade that darkens the viewing area.
TV‐IP450PI TRENDnet User’s Guide 3. new installation*. The password must be between 8 and 16 characters. (Alphanumeric: a‐z, A‐Z, 0‐9, !, @, #, $). Connect the power/network cable *This camera installation wizard is also good for finding the camera if it was setup with DHCP. The IP address may change dynamically with the DHCP setting. If you want to access your camera again and you don’t know the IP address, you can run this camera installation wizard again.
TV‐IP450PI TRENDnet User’s Guide Access Camera through the Web Browser System Management and Default Settings Logging‐in to the Camera 1. Open the web browser on your computer. In the address bar, enter the IP address you setup through the setup CD or 192.168.10.30. (If you have a DHCP server on your network, the IP address will be assigned dynamically.
TV‐IP450PI TRENDnet User’s Guide 3. The camera management page will detect if you installed the camera video streaming plug‐in or not. Click the link to download the plug‐in from the camera. 4. Click Next to install the plug‐in. 5. Click Finish to finish the installation. Permission request depends on the Internet security settings of your computer. Click Run to install the plug‐in. Note: for Mac systems, the plug‐in file is stored on the CD or you can download the latest version from http://www.
TV‐IP450PI TRENDnet User’s Guide 6. Open the browser and login again. Allow the plug‐in from TRENDnet if prompted. The Live View page will show and begin streaming video. Basic Settings Multi‐Language Change your preferred language anytime Snapshot Click this icon to take a video snapshot Zoom Click once to enable zoom. Then, click and drag the area on the picture to zoom in. Click once on picture for 100% zoom. Click the icon again to disable zoom.
TV‐IP450PI TRENDnet User’s Guide Status Bar The status bar shows the status you are at, including enabled the zoom, recording video, and successfully taking a snapshot The icon expands the PTZ control panel Pan / Tilt / Zoom control panel Zoom in / out Focus close / far Iris open / close 2. • Pan the speed dome to the right or left. Speed of pan/tile movement Presets Use the PTZ control buttons to move the lens to the desired position. • Tilt the speed dome up or down. • Zoom in or out.
TV‐IP450PI TRENDnet User’s Guide Calling a Preset position In the PTZ control panel, select a defined preset from the list and click preset. to call the The following presets are predefined with special commands. You can only call them but not configure them. For instance, preset 99 is “Start auto scan”. If you call preset 99, the speed dome starts auto scan function.
TV‐IP450PI TRENDnet User’s Guide Patrols A patrol is a memorized series of preset functions. It can be configured and called on the patrol settings interface. There are up to 8 patrol available for customization. A patrol can be configured with 32 presets. 5. 6. Repeat the steps from 3 to 5 to add more presets. Click to save all the patrol settings. Calling a Patrol route Configure a Patrol route 1. In the PTZ control panel, click 2.
TV‐IP450PI TRENDnet User’s Guide Pattern 5. A pattern is a memorized series of pan, tilt, zoom, and preset functions. A pattern can be called in the pattern settings interface. There are up to 4 patterns available for customization. Click to save the pattern settings. Buttons on the Patterns interface: Buttons Description Start recording a pattern. Configure a Pattern Stop recording a pattern. 1. 2. In the PTZ control panel, click to enter the pattern settings interface.
TV‐IP450PI TRENDnet User’s Guide Playback Time line You can playback the video recording on the network storage and download the video clip and snapshots to your local computer. There is a playback head in the center of the time line represented by a yellow vertical line. To look for a specific video recording, move the time line by clicking and dragging it. If the recording is short, zoom in by clicking button. Click to zoom out the time scale.
TV‐IP450PI TRENDnet User’s Guide Play video Click this button to take a snapshot of current playback Use playback controls to play back the video recordings.
TV‐IP450PI TRENDnet User’s Guide Download snapshots Click this button to download snapshots Select the type of event that triggered the snapshots. Choose the Start Time and End Time. Then, click Search to find the snapshot list. Check the time of the snapshot, and then select the snapshots you want to download, then click Download. Log The log of the TV‐IP450PI will be saved on the network storage. You can search the relevant records and save to your local computer.
TV‐IP450PI TRENDnet User’s Guide System Advanced Settings System Information page shows the camera basic information. Click System then click System Info to show the page. System Device Settings Setup your camera name and location for easy identification. This camera name will also be recognized by other network camera software as the name of this camera. OSD, On Screen Display, the camera name is setting up here as well.
TV‐IP450PI TRENDnet User’s Guide software and OSD, On Screen Display. The default is the camera’s model name: Location: Label where you installed this camera User Accounts You can setup up to 16 user accounts to access the camera’s video stream with a web browser or real time video stream (RTSP). Only one administrator account can be setup to configure the camera and cannot be deleted. Authentication RTSP: Camera’s video stream can be accessed with RTSP, Real Time Streaming Protocol.
TV‐IP450PI TRENDnet User’s Guide Time Settings Set Time: The accuracy of the system clock is important for scheduling and accurate logging. You can synchronize the system time with your computer, or automatically check the time accuracy with a network time server (NTP server). Click the calendar icon and manually select the date. Check the Sync. with computer time to copy the time from your computer. Click Save to save the changes Daylight Savings Setup daylight settings for the camera.
TV‐IP450PI TRENDnet User’s Guide Live View Settings Record File Size: Setup daylight settings for system time. This size of live view video recording. You can choose 256MB, 512MB, or 1GB a file. Smaller file size is good for many short recordings. Save Record Files to: By default, files will be saved under your user name, and under the TRENDnet/RecordFiles. Click Browse and choose a new destination if you want to save the file somewhere else.
TV‐IP450PI TRENDnet User’s Guide Maintenance Default: You can do the camera system maintenance on this page. Load complete factory default settings to the camera. Import Config. File Config. File: To load previously saved configurations, click Browse to find the configuration file and then click Import. Status: Shows the status in loading configuration file. Export: Click Export to download configuration file. The file will be downloaded to the Download folder by default. Export Config.
TV‐IP450PI TRENDnet User’s Guide Network Settings Network interface MAC Address: TCP/IP Setup your basic IPv4 and IPv6 network settings on this page. Click this button to reboot this camera. Duplex and Speed: Choose one of the Ethernet duplex and speed to match your network. Default: auto. MTU: Maximum transmission unit. The maximum byte size Ethernet data field.
TV‐IP450PI TRENDnet User’s Guide Port You can change the service ports number of the camera or disable RTSP or HTTPS services. DDNS Dynamic Domain Name Service, DDNS, allows you to find your camera from the Internet with an easy to remember domain name. Port Numbers HTTP Port: RTSP Port: HTTPS Port: The default web access port. You can change the port number. However, you cannot disable the web service. The default port number is 80. The Real‐Time Streaming Protocol port for video streaming.
TRENDnet User’s Guide TV‐IP450PI PPPoE Setup PPPoE (ADSL) connection to connect your camera with your ISP, Internet Service Provider. PPPoE (ADSL) Enable PPPoE: Dynamic IP: User Name: Password: Confirm: Check this box to enable PPPoE connection. The IP address provided by ISP Enter the account name. Enter the password. Enter the password again. Click Save to save the changes SNMP SNMP Settings allows you to assign the contact details, location, community name and trap settings for SNMP.
TV‐IP450PI TRENDnet User’s Guide SNMP V1/V2 Enable SNMPv1: Check this box to enable SNMP v1 management. Enable SNMPv2c: Check this box to enable SNMP v2c management. Read SNMP Community: Write SNMP Community: Trap Address: Private‐key Algorithm: Choose the privacy key to encrypt SNMP messages: DES or AES. Private‐key Password: Specify the privacy key between 8 to 32 letters.
TV‐IP450PI TRENDnet User’s Guide 802.1X IP Address Filter Setup 802.1X for remote authentication service. Set up a list of clients allow only the clients on the list to access this camera or to reject clients on the list from access this camera. IP Address Filter 802.1X Authentication Enable IEEE 802.1X: EAPOL version: User Name: Password: Confirm: Enable IP Address Filter: Check this box to enable 802.1X authentication service. Extensible Authentication Protocol (EAP) over LAN (EAPoL).
TV‐IP450PI TRENDnet User’s Guide QoS, Quality of Service UPnP Setup traffic prioritization to help smooth out the video stream. You can set the Differentiated Services Code Point (DSCP) bits on outgoing data streams. The QoS capable network device will forward different data in different priorities. The meaning of the value is different in different DiffServ domains. Consult your network manager for the setup details. Universal Plug‐and‐Play is a device discovery protocol set.
TV‐IP450PI TRENDnet User’s Guide Video Settings Video Format Adjust the format of video. Frame Rate: Max. Bitrate: Video Format Video Encoding: Resolution: Choose the video stream you want to modify. H.264 and MJPEG videos are always streaming and can be configured separately. H.264 MJPEG Frame Interval Choose the capturing frame rate. The default value is 30 frames per second. Reduce the frame rate to reduce the capture file size. Choose the maximum video sampling bit rate.
TV‐IP450PI TRENDnet User’s Guide Audio Display Settings Adjust the audio settings for the camera. Adjust video image quality, lightness, and color settings here. Audio Audio Encoding: Audio Input: Input Volume: G.711ulaw, G.711alaw, MP2L2 and G.726 selectable. Select LineIn or MicIn to adjust volume. Slid the bar to turn up/down the volume. The value ranges from 0 to 100. Click Save to save the changes Display Settings © Copyright 2015 TRENDnet. All Rights Reserved.
TV‐IP450PI TRENDnet User’s Guide Display Settings Focus Mode: Auto focus: allows the camera to focus automatically at any time. Manual: use the icon in the live view page to control focus manually. Semi‐auto: cameras focuses only once after pan/tilt/zoom. Minimum Focusing: This function is used to limit the minimum focus distance. The value can be set to 1.5m, 3m, 6m, 10cm and 50cm.
TV‐IP450PI TRENDnet User’s Guide Shutter Speed Video Standard: Day/Night Switch: In Auto mode, the day mode and night mode can switch automatically according to the light condition of environment. This is the base frequency for the video refresh rate. It is recommended to set to the same frequency of your local video standard (NTSC: 60, PAL: 50). Default: 60Hz. Choose whether you want the camera to be set to the day mode (color video) or night mode (IR enhanced black/white video).
TV‐IP450PI TRENDnet User’s Guide Fluorescent Lamp: You can select this mode when there are fluorescent lamps installed near the speed dome. When IR Light Mode is set to manual and the IR Light Bright is not 0, night mode is set as the default mode. Manually setting the day/night mode is invalid. Sodium Lamp: You can select this mode when there are sodium lamps installed near the speed dome.
TV‐IP450PI TRENDnet User’s Guide On Screen Display (OSD) Settings Text Overlay You can display the camera name and the time the video is shooting on the screen. Display extra information on the screen over the image. OSD Display Display Name: Display Date: Display Week: Check this box to display the product name that was setup in the device settings (refer to page 25 to change the device name.) Check this box to display system time. Select 12 or 24 hours’ time format.
TV‐IP450PI TRENDnet User’s Guide Video Recording 1. 2. 3. 4. Video Recording Pre‐record: Post‐record: Overwrite: Enable Record Schedule: Edit: Recording time before trigger event. 5. Recording time after trigger event. Select Yes to allow older recordings to be overwritten. Check this box and then click Save to enable video recording. Select day of the week you want to edit the schedule. Select All Day or Customized schedule of the day.
TV‐IP450PI TRENDnet User’s Guide status of motion detection. The motion tracking is displayed by a green grid. The grid area represents that the camera detects motion in this area. Click Save to save the choices. Events Motion Detection Set up how the motion detection event will be triggered and what actions will be triggered. Draw Area: Click Draw Area button to start drawing. Click and drag on the area you want to set up the motion detection. You can draw up to 8 different areas.
TV‐IP450PI TRENDnet User’s Guide 1. 2. 3. 4. Arming Schedule Edit: Click Edit to define when you want the motion detection works. Select day of the week you want to edit the schedule. Set the time period you want to enable motion detection. (Default is 0‐24 hours, all day). Click Copy to Week if you want the same daily schedule every day or you can select other day of the week and click Copy to copy the schedule of the day to other days.
TV‐IP450PI TRENDnet User’s Guide Upload to FTP: Check this box to send snapshots to an FTP server when motion is detected. Go to Storage / FTP to setup FTP server information Click Save to save the changes Tamper‐proof Enable Tamper Detection: Check this box to enable tamper detection. Click Save to save the settings. Draw Area: Click Draw Area button to start drawing. Click and drag on the area you want to set up the tamper detection. You can setup only one area for tamper detection.
TV‐IP450PI TRENDnet User’s Guide 1. 2. 3. 4. Arming Schedule Edit: Click Edit to define when you want the tamper detection works. Select the day of the week you want to edit the schedule. Set the time period you want to enable tamper detection. (Default is 0‐24 hours, all day). Click Copy to Week if you want the same daily schedule every day. Or, you can select other day of the week and click Copy to copy the schedule of the day to other days.
TV‐IP450PI TRENDnet User’s Guide Exception Snapshot Provides notifications for other system events, set up your notifications here. You can set up your camera to continuously take snapshots or take snapshots when an event happens. Notification Exception Type: Send Email: First choose the exception type, then choose the corresponding action. Check this box to send an e‐mail notification when motion is detected. Go to Events / Email to setup email account information.
TV‐IP450PI TRENDnet User’s Guide Email Set up email accounts for notifications. Event Triggered Enable: Check this box to take snapshots when an event is occurred. Format: Save snapshots in JPEG format Resolution: Uses the same resolution set in Video Format for the snapshot resolution. Quality: Choose a compression quality for snapshot. Interval: State the time interval between this series of snapshots. The default interval is 1 second.
TV‐IP450PI TRENDnet User’s Guide Enable SSL: Check this box if your service provider requires a SSL secured connection. Attach Image/Interval: Check Attach Image if you want to send a snapshot image with the email notification and select the interval of snapshots in seconds. Authentication: Check this box if your server requires a password in order to send email. Most email servers require authentication when sending an email.
TV‐IP450PI TRENDnet User’s Guide Alarm Output Alarm Input Alarm Input No. Alarm Name Alarm Type Select the alarm input number Choose Alarm Input number, name and alarm type. The alarm type could be NO (Normally Open) and NC (Normally closed). Input the alarm name Two alarm types. NO for (Normally Open) and NC (Normally Closed). Normal Linkage Send Email When the alarm is triggered, the camera will send an email notification.
TV‐IP450PI TRENDnet User’s Guide Storage Storage Management * Micro SD card or Network storage device must be setup / formatted before it can be managed / stored. Camera will save to SD card only when there is no additional NAS device setup. Network Storage *Micro SD slot is located at the opposite side of the lens under a protective black strip. (Please make sure the environment is dry and clean when opening the dome cover) No: Type: Server Address: The sequential number of the network storage.
TV‐IP450PI TRENDnet User’s Guide User Name: Password: Enter the user name if the network storage requires authentication. Leave it blank if no authentication is required. Enter the password to access the network storage. Tip: To create network storage on your Windows® based system, create a shared folder and then test your set up with another computer. Enter the IP address of the computer here and enter the shared folder name with a leading forward slash.
TV‐IP450PI TRENDnet User’s Guide Max. Tilt‐angle: Pan/Tilt/Zoom (PTZ) Settings Basic Auto Flip: The maximum angle that the camera can revolve in the tilt direction is adjustable. The values range from (0‐90) to (‐5‐90) You can enable/disable the auto flip function PTZ OSD Zoom Status: PT Status: Preset Status: Set the OSD duration of zooming status as 2 seconds to 10 seconds, always on or off. Set the angle display duration white panning and tilting as 2 seconds to 10 seconds, always on or off.
TV‐IP450PI TRENDnet User’s Guide Limit Initial Position The camera can be programmed to move within the configured stops. (left, right, up or down) Set the camera initial position, you can also call a preset for the position. Click Set to save the limits and Clear to clear the limits. Steps 1. 2. 3. Check the Enable Limit box and select Manual Stops or Scan Stops from the Limit Type list. a. When manual limit stops are set, you can operate the PTZ control panel manually only in the limited area. b.
TV‐IP450PI TRENDnet User’s Guide Park Action Private Mask The feature allows the camera to start at a predefined park action. (scan, preset, pattern) automatically after a period of inactivity (park time). Create masking area to keep your privacy. You can create up to four independent masking areas by clicking and dragging on the screen. Scheduled Tasks function has higher priority over Park Action function therefore when two functions are set at the same time, Scheduled Tasks function takes effect.
TV‐IP450PI TRENDnet User’s Guide Schedule Tasks You can configure the camera to perform a certain action automatically in a user‐ defined time period. 1. 2. 3. 4. Enable the Scheduled Task, define the Park Time and Edit the Tasks that you would like to perform at certain time. © Copyright 2015 TRENDnet. All Rights Reserved. Choose the day you would like to set the task schedule Click All Day or Customize to enter the Start Time and End Time for each task. Choose the task type from the drop down list.
TV‐IP450PI TRENDnet User’s Guide Clear Config Reset You can clear PTZ configurations all at once in this section, select the desire function and click Save to clear. Software Reset Refer to Advanced Settings, Maintenance section on page 22 Hardware Reset Follow the steps to perform a hardware reset © Copyright 2015 TRENDnet. All Rights Reserved. 1. Disconnect the power source form the camera 2. Open the back cover behind the lens and find the reset button 3.
TV‐IP450PI TRENDnet User’s Guide Troubleshooting 1. The camera images are ‘noisy’ Often if the camera is in a low‐light environment, the images can contain a lot of noise. Try enabling Night mode and see if that improves the image quality. Otherwise, try to use the camera in a location where there is a bit more light source. The camera can’t be accessed or access is slow There might be a problem with the network cable.
TV‐IP450PI TRENDnet User’s Guide Federal Communication Commission Interference Statement EN 60950‐1:2006+A11:2009+A1:2010+A12:2011 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
TRENDnet User’s Guide TV‐IP450PI This device is designed to provide uninterrupted monitoring and/or recording. This device does not off power management functionality such as Off mode or Standby mode. IMPORTANT NOTE: NCC AND FCC Warning Statement Note: This country code selection is for non‐US models only and is not available to all US models. Per FCC regulation, all WiFi products marketed in the US must be fixed to US operation channels only.
TV‐IP450PI TRENDnet User’s Guide Česky [Czech] TRENDnet tímto prohlašuje, že tento TV‐IP450PI je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Latviski [Latvian] Ar šo TRENDnet deklarē, ka TV‐IP450PI atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem. Dansk [Danish] Undertegnede TRENDnet erklærer herved, at følgende udstyr TV‐ TV‐IP450PI overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
TRENDnet User’s Guide Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. Limited Warranty WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR USE OF TRENDNET’S PRODUCTS.
