User Guide

  

©Copyright2015TRENDnet.AllRightsReserved.  


TRENDnetUser’sGuide

TV‐IP450PI
46
Pan/Tilt/Zoom(PTZ)Settings

Basic

BasicParameters
EnableProportionalPan: Ifyouenablethisfunction,thepan/tiltspeeds
changeaccordingtotheamountofzoom.
PresetSpeed: Youcansetthespeedof definedpresetfrom1to8.
KeyboardControlSpeed: DefinethespeedofPTZcontrolbyakeyboardas
Low,NormalorHigh.
AutoScanSpeed: Thecameraprovides5scanmodes:autoscan,tilt
scan,framescan,randomscanandpanoramascan.
Thescanspeedcanbesetfromlevel1to40.
Max.Tilt‐angle: Themaximumanglethatthecameracanrevolvein
thetiltdirectionisadjustable.Thevaluesrange
from(0‐90)to(‐5‐90)
AutoFlip: Youcanenable/disabletheautoflipfunction
PTZOSD
ZoomStatus:

SettheOSDdurationofzoomingstatusas2
secondsto10seconds,alwaysonoroff.
PTStatus: Settheangledisplaydurationwhitepanningand
tiltingas2secondsto10seconds,alwaysonor
off.
PresetStatus:

Setthepresetnamedisplaydurationas2seconds
to10seconds,alwaysonoroff.
POWEROFFMEMORY
SetResumeTimePoint:

ThecameracanresumeitspreviousPTZstatusor
actionsafteritisrestartedfromapower‐off.You
cansetthetimepointofwhichthecameraresumes
itsPTZstatusfrom30secondsupto600seconds
beforepower‐off.
ClickSavetosavethechanges




