User Guide

  

©Copyright2015TRENDnet.AllRightsReserved.  


TRENDnetUser’sGuide

TV‐IP450PI
38
UploadtoFTP: CheckthisboxtosendsnapshotstoanFTPserver
whenmotionisdetected.GotoStorage/FTPto
setupFTPserverinformation
ClickSavetosavethechanges

Tamper‐proof
Thisistodetectifthecamerahasbeentamperedwithandsurveillanceiscompromised.
You can set up tamper proof notifications to alert the system manager to check the
camera.


Tamper‐proof
EnableTamperDetection: Checkthisboxtoenabletamperdetection.ClickSave
tosavethesettings.
DrawArea: Click Draw Area button to start drawing. Click and
drag on the area you want to set up the tamper
detection. You can setup only one area for tamper
detection.ClickStopDrawingtostopdrawingmotion
detection areas. The gray block represent the
detectionarea.

Sensitivity: Movetheslidertoadjustdetectionsensitivity.
ClearAll: Clickthisbuttontoclearallthesetupareas.
EnableTamperDetection: Checkthisboxtoenabletamperdetection.ClickSave
tosavethesettings.
