User's Guide

TRENDnetUser’sGuide  TV‐IP326PI
©Copyright2018TRENDnet.AllRightsReserved.  42
2. SelectAllDayorCustomizedscheduleofthe
day.
3. Setthetimeperiodandtheeventyouwant
totriggerthevideorecordingcontinuous
(alwaysrecording)ormotiondetection.
4. ClickSelectAllortheweekdayyouwantto
havethesamescheduleondifferentday.
5. Clickanotherdayoftheweekbyclickingon
itstabtosetthenextschedule.ClickOK
whenyouhavefinishedyoursettings.

Notification
SendEmail: Checkthisboxtosendane‐mailnotificationwhen
motionisdetected.
Network
Storage:
Checkthisboxtorecordvideotonetworkstorage
whenmotionisdetected.
UploadtoFTP: CheckthisboxtosendsnapshotstoanFTPserver
whenmotionisdetected.
ClickSavetosavethechanges

VideoTampering
Thisistodetectifthecamerahasbeentamperedwithandsurveillanceis
compromised.Youcansetuptamperproofnotificationstoalertthesystem
managertocheckthecamera.

Enable
Tamper
Detection:
Checkthisboxtoenabletamperdetection.ClickSave
tosavethesettings.
DrawArea: ClickDrawAreabuttontostartdrawing.Clickanddrag
ontheareayouwanttosetupthetamperdetection.
You can setup only one area for tamper detection.
ClickStopDrawingtostopdrawingmotiondetection
areas.Thegrayblockrepresentsthedetectionarea.


