TRENDnet User’s Guide Contents Product Overview ............................................................................ 4 Features ...................................................................................................................4 Specifications ...........................................................................................................4 Package Contents ....................................................................................................5 Front View ....
TRENDnet User’s Guide TV‐IP326PI Text Overlay.......................................................................................................... 38 Privacy Mask ......................................................................................................... 39 Video Recording ................................................................................................... 39 Events .............................................................................................
TRENDnet User’s Guide TV‐IP326PI Product Overview Specifications 2 Megapixel Record up to 2MP HD video (1920 x 1080) at 30 fps in the space saving H.265 compression format. Covert Night Vision Masked IR LEDs provide covert night‐time viewing up to 30 meters (98 ft.) away. Smart IR Smart IR dynamically adjusts the IR LEDs by lowering the IR intensity when objects are near, and increasing IR intensity when objects are farther away.
TRENDnet User’s Guide TV‐IP326PI Advanced Playback Package Contents Advanced in‐camera archived video playback functionality TV‐IP326PI package includes: Motion Detection Create custom motion detection zones to record video and send email notifications when a zone is triggered. TV‐IP326PI Weather seal Quick installation guide Camera mounting hardware Tamper Detection Create custom tamper detection zones to send an email notification when the camera view has been obstructed.
TRENDnet User’s Guide TV‐IP326PI Front View Mounting Holes Sun Shield Grounding Screw Lock Ring Light Sensor / IR LEDs Reset Button Reset Button /MicroSD slot Reset Button MicroSD slot Ambient Light Sensor IR LEDs Push and hold the reset button then power on the camera. Keep holding the reset button for more than 10 seconds to reset configuration to factory default. Open the case with the included tool and insert the MicroSD slot for storage.
TRENDnet User’s Guide TV‐IP326PI Warnings Cautions Serious injury or death may be caused if any of these warnings are neglected. Follow these safety guards to prevent serious injury or death. Injury or equipment damage may be caused if any of these cautions are neglected. Follow these precautions to prevent potential injury or material damage.
TRENDnet User’s Guide Plan for installation location Viewing angle The TV‐IP326PI is a bullet camera with a focused viewing angle (70 horizontal) that provides non‐distorted and detailed images. Choose the location where has good angle to shoot the image you expect to see. The motion detection area should also be considered when installing the camera. TV‐IP326PI • Sunlight: Avoid direct sun light exposure. Direct sun light will damage the image sensor.
TRENDnet User’s Guide TV‐IP326PI Hardware Installation Mount your camera Cabling Drill the screw holes and the cable hole if necessary with the drill template comes with the package. It’s recommended that the wiring the cable in your home or office by a professional. If you already have the cable deployed, make sure the cable and the connectors meet the category 5 Ethernet cable standards. At least 2 pairs of twisted lines are required for power and data.
TRENDnet User’s Guide TV‐IP326PI Loosen the lock ring and then adjust the camera position. Tighten the lock ring when you setup the camera position. © Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide Setup Your Camera with Camera Utility 1. Please download the utility at http://www.trendnet.com/camerautility TV‐IP326PI 4. This will also require you to Install WinPcap program if you don’t have this installed before, please follow the on screen Instructions to Install It. 2. Extract the downloaded file and double click on the camera utility file to install 5. Restart the computer after the Installation. 3. Last, click Next to finish the installation. © Copyright 2018 TRENDnet.
TRENDnet User’s Guide 6. After the computer has restarted, double click on the Camera Utility icon to launch the program. TV‐IP326PI Access your Camera with the Web Browser Logging‐in to the Camera for the First Time (Windows) 1. Find the camera from the Utility and double click on the IP address to open the browser. 7. Find the camera you would like to access and configure then double click on the IP address. 2. Activate the admin User Account by entering your desired password, and then click OK. 8.
TRENDnet User’s Guide 3. The camera management page will detect if you installed the camera video streaming plug‐in or not. Click the link to download the plug‐in from the camera. (For Internet Explorer and Safari only) Google and Firefox users, skip to step 9. TV‐IP326PI 5. Permission request may show up depends on the Internet security settings on your computer. Click Yes or Run anyway to install the plug‐ in. 6. Click Next to install the plug‐in. 4.
TRENDnet User’s Guide 7. Click Finish to finish the installation. TV‐IP326PI 9. Refresh the browser and the Live View page will show up and begin streaming video. 8. Open the browser and login again, enter the user name admin and new password again to start secured session. © Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide Logging‐in to the Camera for the First Time (OS X) 1. Open the web browser on your computer. In the address bar, enter the default IP address of the camera 192.168.10.30. If the camera is connected to a router/network, please use the Windows Camera Utility to find the exact IP address. TV‐IP326PI 3. The camera management page will detect if you installed the camera webcomponent plug‐in or not. Click the link to download the plug‐in from the camera.
TRENDnet User’s Guide 5. Go to the Finder and navigate to the Download folder. Command‐Click the WebComponents.pkg and then click Open. (If you are install the plug‐ in from the CD when you don’t have internet connection, just browse to /Mac folder and double click the WebComponents.pkg file.) TV‐IP326PI 7. Click Continue to install the plug‐in. 8. Select a destination to install the plug‐in. Then click Continue. 6. Click Open with Installer to start installation. © Copyright 2018 TRENDnet.
TRENDnet User’s Guide TV‐IP326PI 9. Use the default location and click Install. 11. Installation will process automatically. 10. Enter your password and click Install Software 12. Click Close to exit the installation. © Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TV‐IP326PI Live View After you log‐in into the camera management page, you’ll see the Live View page. Snapshot Click this icon to take a video snapshot. Zoom Click once to enable zoom. When enabled, click and drag the area on the picture to zoom in. Right click to resume 100% zoom. Click the icon again to disable zoom. The zoom function works in full screen mode as well. Recording Click once to start recording. Click it again to stop recording.
TRENDnet User’s Guide TV‐IP326PI Playback Time Line You can playback the video recording on the network storage and download the video clip and snapshots to your local computer. (See Network Storage on page 46 to setup the storage.) There is a play back head in the center of the time line represented in a yellow vertical line. To look for a specific video recording, move the time line by clicking and dragging it. If the recording is short, zoom in by clicking button. Click to zoom out the time scale.
TRENDnet User’s Guide TV‐IP326PI Playback Slice images from video playback Use playback controls to play back the video recording. You can take snapshots from playback video or make new video clips from the video you are playing back. Click this button to play the video. Click this button to pause video playback. Click this button to enable zoom. Then click and drag on the video to define the area you want to zoom in. Click again to get back to 100% zoom. Click this button to stop playback.
TRENDnet User’s Guide Download sections of video TV‐IP326PI Download snapshots To save complete video sections or snapshots, you can download the files directly. Click Click button to list snapshots to download button to download video sections. Check the time of the recording, select the videos you want to download, and then click Download. Select the type of event that triggered the snapshots. Choose the Start Time and End Time. Then, click Search to find the snapshot list.
TRENDnet User’s Guide Log The log of the TV‐IP326PI will be saved on the network storage. You can search the relevant records and save to your local computer. (See Network Storage on page 46 to setup the storage.) TV‐IP326PI Search for logs Click the type of log and then the Start Time and End Time. Click Search to start searching. Click First Page, Prev Page, Next Page, and Last Page to show the logs. Click Save Log to save the logs to your computer. © Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TV‐IP326PI System Information System Information page shows the TV‐IP326PI’s basic information. Click System then click System Info to show the page. Network Information IP Address: IP address of the TV‐IP326PI Subnet Mask: Network range of IP address Default Gateway: The default route going from the TV‐IP326PI subnet.
TRENDnet User’s Guide System Configuration Device Settings Setup your camera name and location for easy identification. This camera name will also be recognized by other network camera software as the name of this camera. OSD, On Screen Display, camera name is referring to this setting as well. TV‐IP326PI Authentication RTSP: TV‐IP326PI’s video stream can be accessed with RTSP, Real Time Streaming Protocol.
TRENDnet User’s Guide TV‐IP326PI User Accounts Time Settings You can setup up to 16 user accounts to access the camera’s video stream with a web browser or real time video stream (RTSP). Only one administrator account can be setup to configure the TV‐IP326PI and cannot be deleted. The accuracy of the system clock is important for scheduling and accurate logging. You can synchronize the system time with your computer, or automatically check the time accuracy with a network time server (NTP server).
TRENDnet User’s Guide TV‐IP326PI Daylight Savings Live View Settings Setup daylight savings. Setup the live view video quality, file size and file saving directories. Automatic Update Enable DST: Check this box if your time zone has daylight savings. Start Time: Enter the date that daylight savings starts End Time: Enter the date that daylight savings ends DST Bias Enter how much time the daylight saving adjusted by daylight savings. Click Save to save the changes © Copyright 2018 TRENDnet.
TRENDnet User’s Guide Record File Settings Record file size: This size of live view video recording. You can choose 256MB, 512MB, or 1GB a file. Smaller file size is good for many short recordings. Save record Click Browse and then choose a new destination if you files to: want to save the file somewhere else. Save Click Browse and then choose a new destination if you downloaded want to save the file somewhere else.
TRENDnet User’s Guide Status: Shows the status in loading configuration file. Export Config. File Export: Click Export to download configuration file. The file will be downloaded to the Download folder by default. Remote Upgrade Firmware: Click Browse to find the latest firmware and then click Upgrade. Status: Shows the status in firmware upgrade. TV‐IP326PI Network Settings TCP/IP Setup your basic IPv4 and IPv6 network settings on this page.
TRENDnet User’s Guide Network Interface MAC Address: Click this button to reboot this camera. Duplex and Choose one of the Ethernet duplex and speed to Speed: match your network. Default: auto. MTU: Maximum transmission unit. The maximum field size in the Ethernet packet. Primary DNS: Enter your first IPv4 or IPv6 DNS server address TV‐IP326PI Port You can change the service port numbers of TV‐IP326PI and enable/disable RTSP or HTTPS services.
TRENDnet User’s Guide TV‐IP326PI DDNS PPPoE Dynamic Domain Name Service, DDNS, allows you to find your camera from the Internet with an easy to remember domain name. Setup PPPoE (ADSL) connection to connect your camera with your ISP, Internet Service Provider. DDNS Enable DDNS: Check this box to enable DDNS Service. DDNS Type: Select a DDNS service provider. Server Address: Enter the DDNS server address. Domain: Enter your registered domain/host name on selected DDNS service.
TRENDnet User’s Guide SNMP SNMP Settings allows you to assign the contact details, location, community name and trap settings of SNMP. This is a networking management protocol used to monitor network‐attached devices. SNMP allows messages (called protocol data units) to be sent to various parts of a network. Upon receiving these messages, SNMP compatible devices (called agents) return data stored in their Management Information Bases.
TRENDnet User’s Guide TV‐IP326PI 802.1X Setup 802.1X for remote authentication service. Authentication Algorithm: Authentication Password: Private‐key Algorithm: Private‐key Password: Choose the authentication method to verify the source of information: MD5 or SHA. Specify the authentication password between 8 to 32 letters. Choose the privacy key to encrypt SNMP messages: DES or AES. Specify the privacy key between 8 to 32 letters. SNMP Other Settings SNMP Port: SNMP service port number.
TRENDnet User’s Guide TV‐IP326PI IP Address Filter Quality of Service (QoS) Set up a list of clients allow only the clients on the list to access this camera or to reject clients on the list from access this camera. Setup traffic prioritization tags the video packets to go through network switches and routers with assigned priority. You can set the Differentiated Services Code Point (DSCP) bits on outgoing data streams. The QoS capable network device will forward different data in different priorities.
TRENDnet User’s Guide TV‐IP326PI UPnP Video Universal Plug‐and‐Play is a device discovery protocol set. It allows your camera to easily be found, for example, on a Windows operation system. Video Format UPnP Enable UPnP: Check this box to enable UPnP connection. Friendly Name: The name that will be appeared when searched. Port Mapping Enable Port Check this box to enable UPnP connection. Mapping: Port Mapping Choose Manual or Auto port mapping. Mode: External Port: Choose the port number for mapping.
TRENDnet User’s Guide Video Quality: Choose the video quality. The default is medium quality. Frame Rate: Choose the capturing frame rate. The default value is 30 frames per second. Reduce the frame rate to reduce the capture file size. Max. Bitrate: Choose the maximum video sampling bit rate. Default: 2048 I Frame Interval An I Frame is a frame that records a complete picture. Frames between I frames, (P frame or B frame) only records the image differences between two frames.
TRENDnet User’s Guide TV‐IP326PI Light sensitivities Smart IR: Smart IR can adjust the strength of infrared lights at night depending on the distance of an object to maintain the maximum IR light distance and while maintaining a clear picture when object is close by. Default: On. Max. Exposure Adjust this value for exposure time for Time: each picture. You can choose a value between 1/3 second to 1/100,000 second. The default value is 1/30 second exposure time for each picture.
TRENDnet User’s Guide Schedule: Use quick selection or enter the time down below. Click OK to confirm the time you want to set. Start Time: The start time for day mode. Stop Time: The start time for day mode. Position adjustments Mirror: Choose horizontal, vertical or both to adapt to the physical position of installation. TV‐IP326PI WDR: Digital Wide Dynamic Range compensates for the dark area dynamically. WDR Level: The level of compensation. Range: 0‐ 100%, default: 20%.
TRENDnet User’s Guide TV‐IP326PI On Screen Display Settings Text Overlay Display the camera name and the time the video is shooting on the screen Display extra information on the screen over the image. Display Name: Check this box to display the product name that was setup in the device settings (refer to page 24 Device Settings to change the device name.) Display Date: Check this box to display system time. Display Week: Check this box to display time of the week.
TRENDnet User’s Guide Privacy Mask TV‐IP326PI Video Recording Create a masking area to keep your privacy. You can create up to four independent masking areas by clicking and dragging on the screen. Enable Privacy Mask: Check this box to enable privacy masking. Stop Drawing: Click this button to stop drawing. Clear All: Click this button to clear all the masking areas. Pre‐record: Recording time before trigger event. Post‐record: Recording time after trigger event.
TRENDnet User’s Guide Edit: Click Edit to edit the recording schedule. The Edit Schedule window will pop up. TV‐IP326PI Events Motion Detection Set up how the motion detection event will be triggered and what actions will be triggered. 1. Select day of the week you want to edit. 2. Select All Day or Customized schedule of the day. 3. Set the time period and the event you want to trigger the video recording continuous (always recording) or motion detection. 4.
TRENDnet User’s Guide TV‐IP326PI Draw Area: Click Draw Area button to start drawing. Click and drag on the area you want to set up the motion detection. You can draw up to 8 different areas. Click Stop Drawing to stop drawing motion detection areas. The red grids represent the motion detection area. Sensitivity: Move the slider to adjust detection sensitivity. Clear All: Click this button to clear all the set up areas. Arming Schedule Edit: Click Edit to edit the recording schedule.
TRENDnet User’s Guide 2. Select All Day or Customized schedule of the day. 3. Set the time period and the event you want to trigger the video recording continuous (always recording) or motion detection. 4. Click Select All or the weekday you want to have the same schedule on different day. 5. Click another day of the week by clicking on its tab to set the next schedule. Click OK when you have finished your settings.
TRENDnet User’s Guide Sensitivity: Move the slider to adjust detection sensitivity. TV‐IP326PI Notification Clear All: Click this button to clear all the set up areas. Arming Schedule Edit: Click Edit to edit the recording schedule. The Edit Schedule window will pop up. 1. Select day of the week you want to edit. 2. Select All Day or Customized schedule of the day. 3. Set the time period and the event you want to trigger the video recording continuous (always recording) or motion detection. 4.
TRENDnet User’s Guide TV‐IP326PI Snapshot You can set up your camera to continuously taking snapshots or taking snapshots only when events happening. Event triggered Enable: Check this box to take snapshots when an event is occurred. Format: Save snapshots in JPEG format Resolution: Uses the same resolution set in Video Format for the snapshot resolution. Quality: Choose a compression quality for snapshot. Interval: State the time interval between this series of snapshots.
TRENDnet User’s Guide TV‐IP326PI Email Set up email accounts for notifications. SMTP Port: Enable SSL: Attach Image/Interval: Authentication: User name: Password: Confirm: address as your incoming email server, maybe not. Please ask your email service provider for detail. Service port number for outgoing email.* Check this box if your service provider requires a SSL secured connection.
TRENDnet User’s Guide Network Storage Network Storage TV‐IP326PI No: Type: Server Address: File Path: Network Storage must be setup before it can be managed. For storage management, please refer to the next section. The TV‐IP326PI supports two formats of network storage file systems: NFS and CIFS. NFS, Network File System, is natively supported by Linux computers and most NAS, Network Attached Storage.
TRENDnet User’s Guide Storage Management Network Storage must be setup before it can be managed. To setup storage, please refer to the previous section. TV‐IP326PI Format: Select a network storage volume and then click Format to format your network storage. This action will format the network volume (shared folder) for video recording. Placeholder files (formatting files) will be created to make sure disk allocation is appropriate and the file searching is optimized.
TRENDnet User’s Guide TV‐IP326PI FTP Server Enable Snapshot to FTP: Server Address: Port: User Name/Anonymous : Password: Confirm: Check this box if you want to store snapshots on the FTP. Enter the FTP server IP address. Enter the service port number of the FTP server. Check Anonymous if the FTP server does not require authentication. Enter the User Name if the FTP server requires authentication. Enter the password of the FTP account.
TRENDnet User’s Guide TV‐IP326PI Regulations Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
TRENDnet User’s Guide TV‐IP326PI Europe – EU Declaration of Conformity Français [French] This device complies with the essential requirements of the Directive 2004/108/EC and 2006/95/EC.
TRENDnet User’s Guide TV‐IP326PI Limited Warranty TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR USE OF TRENDNET’S PRODUCTS. TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.
