Quick Installation Guide TU-IDES H/W: v1.
IDE to Serial ATA Converter (TU-IDES) IDE Device Power Cable To Connector of Serial ATA Port To PC Power Supply Connector Motherboard
Troubleshooting Q1: My computer does not recognize my IDE device. What should I do? A1: First, verify that the computer meets the minimum requirements as listed in section 1. Second, verify all the connectors are secured (see section 2). Third, connect the SATA data cable to a different SATA receptacle on the motherboard. Fourth, connect the TU-IDES to a different IDE power connector on your computer. Fifth, connect a different IDE device to the TU-IDES.
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation. Waste electrical and electronic products must not be disposed of with household waste. Please recycle where facilities exist. Check with you Local Authority or Retailer for recycling advice.
TRENDnet Technical Support US . Canada Toll Free Telephone: 1(866) 845-3673 24/7 Tech Support Europe (Germany . France . Italy . Spain . Switzerland . UK) Toll Free Telephone: +00800 60 76 76 67 English/Espanol - 24/7 Worldwide Telephone: +(31) (0) 20 504 05 35 English/Espanol - 24/7 Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.trendnet.com/register 20675 Manhattan Place Torrance, CA 90501 USA Copyright ©2008.
