User Manual

13
For detail internet connection settings, please refer to Section 5. And refer to section 4.3
for Wizard’s wireless setups.
4.2. Invalid WAN Connection
The router was not able to find a valid connection, please check the cable connection and
make sure the WAN LED is on. After the verification, you can either use Rescan or
choose Manual Config to continue setting up the router manually.
Note: When pressing the Skip option, it will skip the Internet settings and go to Wireless
settings section.
For detail internet connection settings, please refer to Section 5. And refer to section 4.3
for Wizard’s wireless setups.
4.3. WLAN Setups
We recommend you setting up the wireless encryptions immediately to protect your
network. To change security levels, please point to the bars, you can extend the security
by clicking next to the existing bar.
Security options from Lowest security with no encryption, WEP (Open) then Medium
security WEP (Shared Key), and High security WPA-PSK, and last Highest security
WPA2-PSK.