Instructions / Assembly

TW40061
INSTALLATION INSTRUCTIONS
Please read carefully and save these instructions, as you may need them at a later date.
CAUTION
GENERAL
All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)
standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a
qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no parts are
missing by referencing the illustrations on the installation instructions.
WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit
conductor. Min 90ºC supply conductors.
Turn off the main power at the circuit breaker before installing the fixture, in order to prevent
possible shock.
ASSEMBLY AND INSTALLATION
1. Make four ¼” holes in the wall, insert plastic anchors(1) into holes.
2. Secure the mounting plate(3) to wall with self-tapping screw(2).
3. Place the backplate(5) onto mounting plate(3) and secure with set screw(4).
4. Install the bulb (7, not included) into the socket.
Do not exceed maximum suggested wattage - Max.60W
DO NOT USE BARE HANDS TO TOUCH THE BULB.
INSTALLATION IS NOW COMPLETE
1500 Cherokee Parkway, Suite 100, Acworth, GA 30102
P: 866-845-5451 • F: 866-816-6165
E: [e-mail] • www.acclaim-lighting.com
by Acclaim Lighting
1. PLASTIC ANCHOR
2. SELF-TAPING SCREW
3. MOUNTING PLATE
4. SET SCREW
5. BACKPLATE
6. KNOB
7. BULB
8. METAL SHADE