User's Manual
Table Of Contents
- Start Radio
- Soft Reset
- Force MIU Read
- LED Indicators
- Green LED will flash during every radio transmission. This will only take place for one minute after a Radio Start and/or a Force MIU Read.
- Red LED will flash during every radio transmission that has a tamper count (a failure to obtain an error-free reading of the MIU). This will only take place for one minute after a Radio Start and/or a Force MIU Read.
- LED Indicators
M
M
1
1
Utility
Radio
Transmitter
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
(c) The provisions of paragraphs (a) and (b) of this section do not apply to digital
devices exempted from the technical standards under the provisions of ยง15.103.
(d) For systems incorporating several digital devices, the statement shown in
paragraph (a) or (b) of this section needs to be contained only in the
instruction manual for the main control unit.
Transparent Technologies, Inc.
www.transparenttech.com