EA003 OPTICAL TACHOMETER CALIBRATION ADAPTER Ü OPERATION MANUAL
EA003 Optical Tachometer Calibration Adapter Operation Manual Version 2.
EA003 OPTICAL TACHOMETER CALIBRATION ADAPTER OPERATION MANUAL Guarantee and service Transmille Ltd. guarantees this instrument to be free from defects under normal use and service for a period of 1 years from purchase. This guarantee applies only to the original purchaser and does not cover fuses, or any instrument which, in Transmille’s opinion, has been modified, misused or subjected to abnormal handling or operating conditions.
EA003 OPTICAL TACHOMETER CALIBRATION ADAPTER OPERATION MANUAL TABLE OF CONTENTS GUARANTEE AND SERVICE ......................................................................................................................... 2 EA003 OPTICAL TACHOMETER CALIBRATION ADAPTER ............................................................... 4 INTEGRATED RPM MODE FOR DIRECT CONTROL ...............................................................................................
EA003 OPTICAL TACHOMETER CALIBRATION ADAPTER OPERATION MANUAL EA003 Optical Tachometer Calibration Adapter • • • • Complete solution calibrates optical tachometers up to 60,000 RPM Complete with adapter unit incorporating high intensity LED Easy to use Works with ProCal & 3000 Series Virtual Front Panel Software Simply connect the adapter to the feature connector on the 3000 series calibrator, select the RPM mode and value and point the tachometer at the high intensity LED to perform accurate and repeat
EA003 OPTICAL TACHOMETER CALIBRATION ADAPTER OPERATION MANUAL Optical Tachometer Calibration Adapter Operation Optical Tachometer Calibration Adapter Connection Using the supplied adapter connection lead (9 way ‘D’ type to 9 way ‘D’ type), connect the optical tachometer calibration adapter to the feature connection on the front panel of the 3000 series calibrator.
EA003 OPTICAL TACHOMETER CALIBRATION ADAPTER OPERATION MANUAL Optical Tachometer Calibration Option Operation The optical tachometer calibration option allows the user to enter a value directly in RPM and use the calibrator to control the optical tachometer adapter. The integrated LED is pulsed at the required frequency to simulate the RPM value entered. RPM Setting Output status (On / Standby) 1.
EA003 OPTICAL TACHOMETER CALIBRATION ADAPTER OPERATION MANUAL 2. The optical tachometer should be pointed at the LED on the adapter with no more than 20° angle to ensure consistent detection by the tachometer. Distance from the LED should also be restricted to within 5cm, again, for consistent detection. Distance 5cm max.
EA003 OPTICAL TACHOMETER CALIBRATION ADAPTER OPERATION MANUAL Care & Maintenance The only maintenance instructions for the adapter is periodic cleaning. See below for details on the cleaning procedure and precautions for handling. Cleaning the Adapter To keep the external enclosure of the adapter in good condition, clean the outer case with a soft cloth. Do not use any liquids in cleaning the enclosure – removal of surface dust is all that is recommended.
EA003 OPTICAL TACHOMETER CALIBRATION ADAPTER OPERATION MANUAL EA003 Optical Tachometer Calibration Adapter Appendix A Specifications Transmille Ltd.
EA003 Specifications General Specifications TRANSMILLE LTD Warm Up Time Double the time since last used up to 20 minutes maximum Standard Interface Transmille Adapter Interface (9 Pin Female 'D' Type connector) Storage : -5°C to +60°C Operation : 0°C to +50°C Operation : <80% to 30°C, <70% to 40°C, <40% to 50°C Storage : <95%, non-condensing Operation : 3000m (10,000ft) Maximum Transit : 12000m (40,000ft) Maximum 1000mcd (wavelength 660nm) 20% (5:1) Temperature Performance Relative Humidity Altitude
EA003 Specifications Specifications Range Resolution 60 to 60,000 RPM 6 RPM TRANSMILLE LTD 1 Year Rel. % 0.0030 Specifications apply at TCal ± 5°C Outside this range an allowance of 0.18 x 1 Year Spec. per °C should be added. Due to continuous development specifications may be subject to change. EA003 Specifications : V3.
