User's Manual

System Guide
TransCore Proprietary
D–14
Number Command Name Reader Message
830 Disable automatic periodic RF
status report
Done
831 Enable automatic periodic RF
status report
Done
836 Disable MPRX mode Done
837 Enable MPRX mode Done
850 MUX RF port 0
Done
851 MUX between RF ports 0 and 1 Done
852
MUX between RF ports 0, 1, and
2
Done
853
MUX between RF ports 0, 1, 2, and
3
Done
891 MUX test mode RF port 1 only Done
892 MUX test mode RF port 2 only Done
893 MUX test mode RF port 3 only Done
Alphabetical Command List
The following conventions are used in Table D – 3:
Items in bold italics identify factory default settings.
Only the command-related data portion of the reader message is shown.
Refer to Chapter 7, “Chapter 7 Commands” on page 7–2 for the complete syntax of
commands and messages.
Table D – 3 MPRX Commands Listed Alphabetically
Command Name Code Reader Message
All IDs transmit 40 Done
Appended info status display 524 IDAP T0 D0 Xx
T0 = time not appended
T1 = time appended
D0 = date not appended
D1 = date appended
X0 = aux info not appended
X1 = aux info appended