User's Manual

Altum AC 600 User Manual LT-9064 Rev A 15
Port: Specifies the listening port, the default being 80
for HTTP and 443 for HTTPS.
3.3 Services
In the System → Services page, you can configure the
Ping Watchdog and the Auto Reboot.
3.3.1 Ping Watchdog
Ping Watchdog: Configures the device to ping to a
remote IP address and reboot if the connection is lost.
It is disabled by default.
IP Address to Ping: Sets the remote IP address to ping
e.g. 192.168.1.10 or 8.8.8.8.
Ping Interval: Specifies the time between successive
pings, the default being 5 seconds.
Startup Delay: Sets the time delay in seconds after
the radio finishes rebooting, before running the Ping
Watchdog, the default being 60 seconds.
Failure Count to Reboot: Specifies the number of
failed pings before the radio reboots automatically.
3.3.2 Auto Reboot
Auto Reboot: Allows the radio to reboot itself
automatically, disabled by default.
Mode: Chooses the Auto Reboot mode By Time or By
Number of Hours.
Time: Sets the time of day to reboot if the Mode is By
Time.
Number of Hours: Sets the delay as an integer
number of hours after each reboot, if the Mode is By
Number of Hours.
3.4 SNMP
The Simple Network Management Protocol (SNMP) is
an Internet-standard protocol for managing devices
on IP networks. It consists of a set of standards for
network management, including an application layer
protocol, a database schema, and a set of data
objects. SNMP exposes management data in the form
of variables on the managed systems, which describe
the system configuration. These variables can then be
queried (and sometimes set) by managing
applications.
In the System → SNMP Page, you can configure SNMP
V2c and SNMP V3.
A MIB file with detailed information is available from
the Trango Website that can be loaded on the SNMP
Manager.
3.4.1 SNMP Information
In the SNMP Information section, the text fields for
the SNMP Enterprise ID, Contact, and Location
information are shown.
Figure 28: Auto Reboot settings in the System →
Services page.
Figure 27: Ping Watchdog settings in the System →
Services page.