Product Brochure
14
Additional Instructions/Notes:
• Always inspect the ooring thoroughly before installation. Report any defects PRIOR to installation.
• DO NOT slide heavy appliances or furniture over or across the ooring. Always lift objects and place them on
a hard board between the ooring and object and gently reposition them.
• Use permanent caulk next to bathtubs, showers, sliding doors, patio doors, around metal door jambs or
similar areas.
• For bathroom installations, it is not necessary to remove the toilet. Make relief cuts around the perimeter
of the toilet and make sure the vinyl ooring is laying at before trimming o the excess material once
installed. Apply caulk around the toilet, next to the bathtubs and showers to prevent moisture from getting
under the vinyl. Note: if there is a ceramic sanitary cove and no place to install trim mold, you can apply
silicone caulk around the walls.
• Make sure furniture legs have large surface, non-staining plastic oor protectors or non-staining felt pads.
The protectors should be at least one inch in diameter and rest at on the oor. The heavier the item, the
wider the oor protector should be. Replace small, narrow metal or dome-shaped glides with smooth, at
glides that are in at contact with the oor.
TrafcMaster Commercial Sheet Vinyl ooring seams may be heat welded immediately after installation.
Light Commercial Installation Guide – Sheet Vinyl Flooring
This document is reviewed on an ongoing basis. 10/10/14