Instructions / Assembly
CARD SHUFFLER INSTRUCTION
Take your deck or 2 of cards and split them into two as close to equal piles as possible for optimal shuffling.
Place each half of the deck into the two slots on each side of the shuffler with cards facing down.
To initiate shuffling press down on the button labeled “PRESS DOWN TO OPERATE”
Hold down the button until the all of the cards have passed through the shuffler into the plastic card tray.
Remove the card tray now filled with cards; you may repeat the process as many times as desired.
Have fun using your automatically shuffled cards!
Once you have opened the card shuffler, remove the clear plastic card tray from its packaging in the
center of the shuffler. Next you are going to need to insert 4 AA batteries into the two batteries
sockets on the bottom of the shuffler. Now you are ready for use.
1.
2.
3.
4.
5.
6.
SETUP:
USE: