User Guide
Table Of Contents
- About this User Guide
- 1 Quick Start
- 2 Configure the Network
- 3 Monitor the Network
- 4 Manage the EAP
- 5 Configure the System
- 6 Application Example
55
View Wireless Settings
Under this tab, you can view the wireless settings of EAP.
Tips:
To change the wirless settings, you can refer to
Configure the Wireless Parameters
.
Note:
·
For a dual-band EAP, there are two bands: 2.4GHz and 5GHz. You can click to select a band to
view.
·
The following figure posted in the introduction takes 2.4GHz as an example.
The following wireless information is displayed:
Channel/
Frequency
Displays the channel and frequency which are currently used by the EAP.
Channel Width Displays the channel width which is currently used by the EAP.
IEEE802.11 Mode Displays the IEEE802.11 protocol currently used by the EAP.
Max TX Rate Displays the maximum physical rate of the EAP.
View LAN Information
Under this tab, you can view the LAN information of EAP.