User Guide
Table Of Contents
- About this User Guide
- 1 Quick Start
- 2 Configure the Network
- 3 Monitor the Network
- 4 Manage the EAP
- 5 Configure the System
- 6 Application Example
7
Log in via the Domain Name
In this method, you needn't know the IP address of the EAP, but you need to prepare a
wireless client device, such as a wireless laptop. Follow the steps below to log in to the
EAP wirelessly:
Note:
EAP320 and EAP330 are not currently available for login via domain name.
Log In via the Domain Name
In this method, you needn't know the IP address of the EAP, but you need to prepare a
wireless client device, such as a wireless laptop. Follow the steps below to log in to the
EAP wirelessly:
1. Set the wireless client device to get IP settings assigned automatically.
2. Search the default SSID (Network name) using your wireless client device and connect
to the wireless network of the EAP. The default SSID of the EAP is printed on the
product label at the bottom of the device. The dual-band EAP has two default SSIDs
named TP-LINK_2.4GHz_XXXXXX and TP-LINK_5GHz_XXXXXX on the 2.4GHz band
and 5GHz band, and the single-band EAP has a default SSID named TPLINK_2.4GHz_
XXXXXX on the 2.4GHz band.