Manual

Archer C1900 AC1900 High Power Wireless Dual Band Gigabit Router
- 49 -
 MAC Address (to be bridged) - The MAC address (BSSID) of the AP your router is
going to connect to as a client. You can also use the Survey function to select the MAC
address (BSSID) to join.
 Survey - Click this button, you can search the APs that run in all channels.
 Key type - This option should be chosen according to the AP's security configuration. It
is recommended that the security type is the same as your AP's security type
 WEP Index - This option should be chosen if the key type is WEP. It indicates the index
of the WEP key.
 Auth Type - This option should be chosen if the key type is WEP. It indicates the
authorization type of the Root AP.
 Password - If the AP your router is going to connect needs password, you need to fill
the password in this blank.
5.5.2 WPS
Choose menu “Advanced→Wireless 5GHz→WPS”, you can see the screen as shown in Figure
5-28. This section will guide you to add a new wireless device to an existing network quickly by
WPS (Wi-Fi Protected Setup) function.
Figure 5-28 WPS
 WPS Status - Enable or disable the WPS function here.
 Current PIN - The current value of the router's PIN is displayed here. The default PIN of the
router can be found in the label or User Guide.
 Restore PIN - Restore the PIN of the router to its default.
 Gen New PIN - Click this button, and then you can get a new random value for the router's
PIN. You can ensure the network security by generating a new PIN.
 Add Device - You can add a new device to the existing network manually by clicking this
button.