Specification Sheet

Libella
™
Wall-Mount M EcoPower
®
Faucet
#SS-01108, v.02
Ph: [phone] | Fax: [phone] | www.totousa.com | © TOTO USA
These dimensions and specifications are subject to change without notice
NOTE
Following the federal mandate for water efficiency
outlined in the Environmental Protection Act of 1992,
faucets can be rated for water consumption based on
two categories: Flow Rate and Water Consumption.
TOTO uses the water consumption standard because
it is the most accurate method of measuring water
use. TOTO faucets also comply with the CALGreen
Guideline of water usage.
Water Saving
On-Demand [10 sec.] faucet (0.18gpc)
28% less than Federal Standard (0.25gpc)
10% less than CAL Green (0.20gpc)
TEL1D1 Series
Libella Wall-Mount M
Controller
*Gallons per cycle (gpc) is the amount of water per usage cycle .
** On-demand refers to the way in which the water is dispersed (i.e.; water is only dispersed when the sensor is activated by the user as
needed).
SPECIFICATIONS
Hot/Cold Mixing Tee (TLM10)
Available Mixing Valves
Thermostatic Mixing Valve (TLT10)
2-1/2” (63mm)
1-7/16” (36mm)
7/8”
(23mm)
3/8 COMPRESSION
2-13/16” (71mm)
Finished wall
2-3/8”
(60mm)
9-1/2”
(242mm)
8-1/4”
(210mm)
Ø2-3/16”
(Ø55mm)
1-5/8”
(42mm)
80°
L=32-1/4”
(L=820mm)
L=41-5/16”
(L=1050mm)
5-5/8”(142mm)
G1/2
1-11/16” (42mm)
1-3/4”
(44mm)
7” (178mm)
Controllers
4-5/8”(117mm)
3-5/16”(83mm)
3-5/8”(94mm)
TELC105
TELC101
G1/2 compatible with ½ NPSM
3-3/16”(82mm)
G1/2
G1/2
G1/2
Φ1-5/8” (Φ 42mm)
G1/2 compatible
with ½ NPSM
3-5/16”(84mm)
Power Supply EcoPower
Sensor Detection
Range
5-1/8" - 7-7/8" (130 - 200mm)
Sensor is self-adjusting
Water Supply
Pressure
Min (Flowing) Pressure: 15psi (100 kPa)
Max (Static) Pressure: 80 psi (551kPa)
Water Supply G1/2 (1/2 NPSM compatible)
Inlet Temperature
Range
39-110°F(4-42°C)
Ambient
Temperature
32-104°F(0-40°C)
Humidity Max. 90% RH
Flow Rate
0.18 gpc* - max 10 second On-Demand**
(0.18 gpc = 1.0 gpm x 10/60 seconds)
Equipped with 1.0 gpm flow control
Warranty Three year limited