User's Manual

unauthorized access. If you have multiple sign-in methods set for a user
account, you can select an option on the Windows login screen by tapping
sign-in options. Password authentication is the default sign-in option.
Turning off the power
The power can be turned off in one of the following modes, either Shut
Down Mode, Sleep Mode or Hibernation Mode.
Shut Down Mode
When you turn off the power in Shut Down Mode, no data will be saved
and the tablet will boot to the main screen of the operating system the next
time it is turned on.
1. If you have entered data, either save it to the internal storage or to
other storage media.
Never turn off the power while an application is running. Failure to do
so can cause data loss.
Never turn off the power, disconnect an external storage device, or
remove storage media during data read/write. Failure to do so can
cause data loss.
In any emergency case, you can also press and hold Power button for
about 10 seconds to force off the power.
2. Tap the Settings charm.
3. Tap Power, and then select Shut down. Or press and hold the power
button for about two seconds till the screen shows Slide to shut
down your PC appears, and then slide down the screen to shut down
the tablet.
4. Turn off any peripheral devices connected to your tablet.
Do not turn the tablet or peripheral devices back on immediately. Wait a
short period to avoid any potential damage.
Restarting the tablet
Certain conditions require that you reset the tablet, for example if:
You change certain tablet settings.
If you need to restart the tablet, tap Power, and then select Restart in the
Settings charm.
Sleep Mode
If you have to interrupt your work, you are able to turn off the power without
exiting from your software by placing the tablet into Sleep Mode. In this
mode, data is maintained in the main memory of the tablet. When you turn
on the power again, you can continue working right where you left off.
User's Manual
2-8