User's Manual

40
CONTROLS AND FEATURES
English
Wireless Information
The settings configured in Wireless Setup can be confirmed.
a Press QUICK to open the Quick Menu .
b Press B or b to select Wireless Information and
press
Q .
c The Wireless Information window will appear.
NOTE: Press the RED button to scan for all available
APs.
NOTE: Even if an AP for IEEE 802.11n is used when
Encryption is set to WEP or TKIP , the Speed value might be
low. It is recommended that
Encryption be changed to AES
(see “Manual Setup” on
see page 39 ).
Notes on wireless LAN environment:
• The function of all IEEE802.11 is not supported.
• The ad-hoc mode is not supported.
• It is recommended to use IEEE 802.11a or IEEE 802.11n on
5 GHz for audio and SD video streaming.
• It is recommended to use IEEE 802.11n on 5 GHz for HD
video streaming.
• It is recommended that the encoding rate for streaming
video content is 20 Mps or less.
• It is not recommended to use 2.4 GHz for audio and video
streaming.
• Content playback may be interrupted by various surrounding
interference.
NOTE:
• When the DHCP function of the router connected with this TV
is On, you can set
Auto Setup to On or Off .
(This should usually be set to
On .)
• When the DHCP function of the router is Off, set
Auto Setup
to
Off , and set the IP Address manually.
IP Address Setup
Auto Setup:
a In the PREFERENCES menu, highlight Network Setup
and press
Q .
b Press B or b to highlight Advanced Network Setup ,
and press
Q .
c Press B or b to highlight IP Address Setup , and
press
Q .
Item Description
Status Connected is displayed when the TV is
connected with the AP.
Disconnected is displayed when the TV is
not connected with the AP.
Signal Connection signal strength with AP
(
STRONG / MEDIUM / WEAK )
Speed Link with AP
Mode Working mode (11a, 11b, 11g, 11n)
Channel Channel in use (1-165)
Network Name SSID set
Authentication Authentication set
Encryption Encryption set
Security Key Security Key set
AP MAC
Address
The AP’s MAC address is displayed when
the TV is connected with the AP.
USB MAC
Address
The MAC address of the USB (Dual Band
WLAN Adaptor) is displayed.
DHCP
Enabled is displayed when using DHCP.
Disabled is displayed when not using
DHCP.
IP Address The TV’s IP address
Subnet Mask Value of the Subnet Mask
Default
Gateway
Address of the Default GATEWAY
DNS Address of the DNS
Quick Menu
Picture Size
Picture Mode AutoView
Super Live
More Information
YouTube
Channel Options
TV Speakers
00:00
Sleep Timer
Media Player
Speakers
Photo Frame
Wireless Information
Headphone Level
0
Advanced Network Setup
Network Type Wired
Advanced Network Setup
Network Setup
Wireless Setup
IP Address Setup Wired
MAC Address
DNS Setup
Advanced Network Setup
WL74_WebOM.book Page 40 Wednesday, July 14, 2010 7:12 PM