Manual

- 20-
For WINDOWS 2000 and XP:
1. Turn off your printer. Plug the cable to connect USB PORT REPLICATOR
parallel port and printer. Turn on the printer afterwards.
2. Turn on your computer and plug in the USB cable to connect the USB PORT-
REPLICATOR and the USB port of PC.
3. If you have installed a printer device before, click Start, Settings, Printers.
Right-click the default installed printer and click on Properties. The Properties
dialog box of the installed printer will appear on your screen.
4. Click the Ports tab and change the printer port to USB001 (Virtual printer port
to USB).
5. If you do not have a printer installed yet, click on Start, Settings, Printers, Add
Printer. The Add Printer Wizard will start and assist you in installing a new
printer device. Select the printer manufacturer and model name from the list
provided by the wizard or use the printer driver diskette supplied by your printer.
6. When prompted which port the printer will use, click on USB001 (Virtual
printer port to USB).