Tecra R950 Series Manual

Getting Started

Connecting an external device

When the touch pad is disabled, the (touch pad) primary and

secondary buttons will also be disabled. However, the AccuPoint

and AccuPoint

button functions will remain enabled.

Scrolling with the touch pad

There are two active regions on the touch pad that allow you to

scroll as you would with any wheel device on a mouse or trackball.

To scroll vertically, run your finger up or down along the right edge

of the touch pad. To scroll horizontally, run your finger along the

bottom edge of the touch pad. This feature can be disabled or

changed in the Mouse Properties dialog box.

Control buttons

When a step instructs you to click or choose an item, move the

cursor to the item, then press and release the primary (left-hand)

button. To double-click, press the primary button twice in rapid

succession. The primary button usually corresponds to the left

mouse button.

The function of the secondary (right-hand) button depends on the

program you are using. It usually corresponds to the right mouse

button (“right-clicking”). Check your program’s documentation to

determine whether it uses the right mouse button.

Connecting an external device

Depending on your system, some models may include USB 3.0

port(s). To distinguish these ports, please look for the blue inset

within the USB 3.0 port (if available).

You can easily attach an external device your computer.

To do this:

1 Read the directions that came with the device to see if you first

need to install new software.

2 Connect the device’s video or USB cable to the port on the

computer and to the device.

3 Connect the device’s power cable to a live electrical outlet (if

applicable).

Turn on the external device (if applicable). Your computer may

automatically detect the external device.

NOTE