Laptop User Manual

User’s Manual 4-8

Operating Basics

Loading discs

To load a disc, follow the steps as detailed below:

1. When the computer’s power is on, press the eject button to open

the disc tray slightly.

2. Grasp the disc tray gently and pull until it is fully opened.

Pressing the eject button and pulling the disc tray open

3. Lay the disc, label side up, in the disc tray.

Inserting a disc

1. Disc tray 2. Eject button

1. Laser lens

When the disc tray is fully opened, the edge of the computer will extend

slightly over the disc tray. Therefore, you will need to turn the disc at an

angle when you place it in the disc tray. After seating the disc, however,

make sure it lies flat.