High Definition LED Television Manual

Using the TV’s features

Adjusting the audio

To listen to an alternate language on an ATSC digital station (if

available), highlight the Language field in step 3 above, and then

press the ( / arrow) buttons to select the language you prefer.

To listen to a second audio program on an analog station, if

available, select SAP in step 3 above.

❖ A second audio program (SAP) can be heard only on those TV

stations that offer it. For example, a station might broadcast

another language as a second audio program. If you have SAP

on, you will see the current program on the screen but hear the

other language instead of the program’s normal audio.

❖ If you have SAP on and the station you are watching is not

broadcasting a second audio program, the station’s normal

audio will be output. However, occasionally there is no sound at

all in SAP mode. If this happens, set the MTS feature to Stereo

mode.

Adjusting the audio quality

You can adjust the audio quality by adjusting the bass, treble and

balance.

To adjust the audio quality:

1 Press the MENU button and open the Sound menu.

2 Highlight Audio Settings, and then press the ENTER button.

3 Press the ( / arrow) buttons to highlight the item you wish

to adjust (Bass, Treble, or Balance).

4 Press the ( / arrow) buttons to adjust the level.

❖ makes the bass or treble weaker or increases the balance

in the left channel (depending on the item selected).

❖ makes the bass or treble stronger or increases the

balance in the right channel (depending on the item

selected).

5 To save the new settings, highlight Done, and then press the

ENTER button.

To reset the settings to the factory defaults, highlight Reset,

and then press the ENTER button.

NOTE