Personal Computer User Manual

Getting Started

Adding memory (optional)

The computer has two memory slots—Slot A and Slot B. You can

install one or two memory modules.

Before you install or remove a memory module, turn off the computer

using the Start menu. If you install or remove a memory module

while the computer is in Sleep or Hibernation mode, data will be lost.

For this model, Slot A is the bottom slot. Slot B is the top slot. If only

one memory module is to be installed, it must be installed in Slot A.

If the computer is on, begin at step 1; otherwise, skip to step 3.

1 Click Start.

(Sample Image) Shut down button

2 Click the Shut down button in the lower-right corner of the

Start menu.

The computer closes all open programs, shuts down the

operating system, and then turns off.

3 Unplug and remove any cables connected to the computer,

including the AC adaptor.

Do not try to remove a memory module with the computer turned on.

You can damage the computer and the memory module.

Do not remove the memory module while the computer is in Sleep or

Hibernation mode. The computer could hang up the next time you

turn it on and data in memory will be lost. In either of the above

cases, the Sleep configuration will not be saved.

NOTE

Shut down button

Start button