Network Card User Manual

Users Manual TOPAS900 Flash V2.1
HWU Elektronik Oberhausen Page 25
where the Debugger places temporary files. Confirm this dialog for the next step.
Script File and Startup Label can be left unchanged. Confirm the dialog to get to the
next dialog.
• This dialog has no effect for the
ROM monitor operation and should
be confirmed unchanged.
• This dialog asks for a filename for
the new profile that has been created
in the steps before. The default name
is ..\profile1.tdp. Choose a
meaningful name for the project like
leddim.abs. After confirmation of
this last step the profile is created
and stored to disk. The abs-file will
be loaded. Check the information
given at the bottom of the TMPro
window about the loading of debug
information or warnings or error
messages. When the profile is
double-clicked in the Windows-
Explorer the TMPro Debugger is started automatically with all the setting contained in
the profile.
4.2.3. TMPro ROM-Monitor
Using the Toshiba environment makes need of changing the ROM-Monitor in TOPAS900
Flash board because the IAR C-SPY Monitor is installed by default. For programming the
on-board (external) flash memory with the TMPro Monitor please refer to section 5.2. The
file that is to be programmed into external flash ROM is named Toshiba.h20.The speed
of serial RS-232 link to the PC is always 38400 baud. After starting the monitor (by
pressing the reset button) the yellow led flashes to show that the monitor is running.