DATA PROJECTOR TLP780U TLP781U

22
Installation and
connections
CONTENTS
Notes
The projector cannot be connected to a computer without an analog RGB connector. For details, refer to the computer manual.
You may not be able to connect some computers to the projector. For details, consult the dealer.
When connecting to a Macintosh computer, use the supplied Mac adapter (Multiple Scan 21 compatible). For some models the adapter is not required.
Some computers may have output modes which are not compatible with this projector. Check the compatibility of the connectors, signal levels, timing,
resolutions, etc.
Connecting a computer (COMPUTER IN 1 connector)
You can project the picture from the computer.
Check that the power supplies for the projector and for the computer are off before connecting the cables.
USB
COMPUTER IN 1
COMPUTER IN 2
S-VIDEOVIDEO
VIDEO IN
R - AUDIO - L
AUDIO
IN
(
Y/P
B
/P
R
)
MONITOR
OUT
CONTROL
COMPUTER IN 1 connector
For use as both analog RGB (1) and Y/P
B/PR input. At shipping from
factory, it is set for use as analog RGB (1) input.
AUDIO IN jack
For use as both audio signals for RGB input (analog RGB (1)/analog RGB (2)/
digital RGB) and Y/P
B/PR input.
RGB cable (supplied)
To AUDIO IN jack
Computer
To COMPUTER IN 1 connector
Be sure to connect in the proper
direction.
To monitor port
Audio cable (supplied)
Connecting a Mac adapter for
Macintosh computers (supplied)
ø3.5mm stereo mini-jack
To audio output port