3LCD Projector TLP-MT3E Owner's Manual

13
Before use
Notes
• The remote control may not operate when
there is sunlight or other strong light such as
a fluorescent lamp shining on the remote
sensor.
• Operate the remote control from a position
where the remote sensor is visible.
• Do not drop the remote control or otherwise
jolt it.
• Keep the remote control out of locations with
excessively high temperature or humidity.
• Do not get water on the remote control or
place wet objects on it.
• Do not disassemble the remote control.
• Under unusual circumstances the remote
control may not operate well due to the
location being used or the surroundings.
At such times, change the direction of the
remote control to the projector and retry the
operation.
(Continued)
Power supply cord
selection
If your line voltage is 220 to 240, use one of the
following types of cable.
In Singapore, use the UK type plug cable. (The
UK type plug [MP5004] of this model is
approved by PSB.)
Plug
configuration
Plug type
EURO
UK
Line voltage
220 – 240V
220 – 240V
Use a 5A fuse which is approved by ASTA or
BSI to BSI362.
Always replace the fuse cover after changing
the fuse.