User's Manual

40
CONTROLS AND FEATURES
English
The Base Colour Adjustment feature allows the adjustment of
individual colours to suit personal preference. This can be useful
when using an external source.
a In the Advanced Picture Settings menu, press B or
b to select Base Colour Adjustment and press OK.
b Press B or b to select an option and press c to move
to the adjustment window.
c Press C or c to select Hue, Saturation or Brightness
and press
B or b to adjust the settings as required.
d Press BACK to return to the previous menu.
To return to the factory settings, select Reset and
press OK.
Colour Temperature increases the “warmth” or “coolness” of
the picture by increasing the red or blue tint.
a In the Advanced Picture Settings menu, press B or
b to select Colour Temperature and press OK.
b Press B or b to select Colour Temperature and
press
C or c to select Cool, Natural or Warm to suit
your preference.
c Press B or b to select Red Level, Green Level or
Blue Level and press
C or c to adjust the level.
NOTE: To return the adjustments to the factory defaults,
select Reset and press OK.
When the Auto Brightness Sensor is activated, it will
automatically optimise the backlighting levels to suit ambient
light conditions.
a In the Advanced Picture Settings menu, press B or
b to select Auto Brightness Sensor.
b Press C or c to select On or Off.
When the Active Backlight Control feature is activated, it will
control the backlighting levels depending on various scenes such
as picture motion bright scene or dark scene.
a In the Advanced Picture Settings menu, press B or
b to select Active Backlight Control.
b Press C or c to select High, Low or Off.
High: To control the backlighting levels depending on various
scenes such as motion picture bright scene or dark
scene
Low: To control the backlighting levels for dark scene
Black/White Level increases the strength of dark areas of the
picture to improve the definition.
a In the Advanced Picture Settings menu, press B or
b to select Black/White Level.
b Press C or c to select High, Middle, Low or Off.
When watching a DVD, the compression may cause some words
or picture elements to become distorted or pixelated.
Using the MPEG NR feature reduces this effect by smoothing out
the edges.
a In the Advanced Picture Settings menu, press B or
b to select Noise Reduction and press OK.
b Press b to select MPEG NR.
c Press C or c to select High, Middle, Low or Off to suit
your preference.
Base Colour Adjustment
Colour Temperature
Hue
Saturation
Reset
Brightness
0Red
Green
Blue
Yellow
Magenta
Cyan
00
000
000
000
000
000
Base Colour Adjustment
Hue Saturation Brightness
0Red 0 -1
Auto Brightness Sensor
Active Backlight Control
Black/White Level
MPEG NR – Noise Reduction
Noise Reduction
DNR
MPEG NR
Low
Auto