User's Manual

38
CONTROLS AND FEATURES
English
DNR allows you to “soften” the screen representation of a weak
signal to reduce the noise effect.
a Select DNR from the Noise Reduction menu.
b Press C or c to select Low, Middle, High, Auto or Off.
The differences may not always be noticeable (for the
best result use lower settings as picture quality can be
lost if the setting is too high).
This feature will reduce picture blur without decreasing image
brightness or adding flicker.
a In the Advanced Picture Settings menu, press B or
b to select Active Vision.
b Press C or c to select High, Middle, Standard or Off.
NOTE: When Picture Mode is set to Game, this feature will be
grayed out and automatically set to Off.
This feature allows you to reset the current Advanced Picture
Settings to the default values.
a In the Advanced Picture Settings menu, press B or
b to select Reset.
b Press OK.
When this television receives a true Widescreen picture and Auto
Format is On, it will automatically be displayed in Widescreen
format irrespective of the television’s previous setting.
a Press MENU / C c to highlight Setup icon.
b Press B / C c to highlight Preferences icon and
press OK.
c Press B or b to select Display Settings and press OK.
d Press B or b to select Auto Format and press C or c
to select On or Off.
When 4:3 Stretch is activated, the size switching system
changes 4:3 programmes into full screen picture.
a In the Preferences menu, press B or b to select
Display Settings and press OK.
b Press B or b to select 4:3 Stretch and press C or c to
select On or Off.
When Blue Screen is selected, the screen will turn blue and the
sound will be muted on analogue channels and external input
modes when no signal is received.
NOTE: Some external input sounds may not be muted.
a In the Preferences menu, press B or b to select Blue
Screen.
b Press C or c to select On or Off.
The picture position may be adjusted to suit personal preference
and can be particularly useful for external inputs.
NOTE: The Picture Position feature cannot be selected in the
DTV mode.
a In the Preferences menu, press B or b to select
Display Settings and press OK.
b Press B or b to select Picture Position.
c Press OK to view the options available for the picture
format that has been selected.
d Press B or b to select an option and press C or c to
adjust the settings.
The options differ depending on the currently
selected widescreen format and the input signal.
To return to the original factory settings, select Reset
in the Picture Position menu and press OK.
This feature is used to hold a still image on the screen.
a Press r to hold an image on the screen, and press
r again to cancel.
DNR – Digital Noise Reduction
Active Vision
Resetting the advanced picture settings
Automatic Format (Widescreen)
Auto Format On
4:3 Stretch Off
Picture Position
PC Settings
Display Settings
4:3 Stretch
Blue Screen
Picture Position
Picture still
Auto Format On
4:3 Stretch Off
Picture Position
PC Settings
Display Settings
0
0
Picture Position
Horizontal Position
Reset
Vertical Position