User Guide

FL INVERTER AND 14.1” LCD REMOVAL

1. Remove one M2x5 silver screw securing the

FL inverter board.

2. Carefully lift up the FL inverter board and

disconnect the LCD/FL cable from CN1 and the

FL cable from CN2.

3. Remove two M2x5 silver screws securing the LCD

bracket.

4. Remove four M2X3 silver screws securing the

LCD module.

5. Carefully rotate out the top of the LCD module

enough to access the display cable

6. Disconnect the LCD/FL cable from the LCD module.

7. Lift out the LCD module and peel off two

EMI shield/cushion.

14.1” DISPLAY MASK REMOVAL

TOSHIBA

Tough Enough for Today’s World.

FIELD REPLACEABLE UNIT DOCUMENTATION

Satellite

1. Remove two mask seals and four rubber seals on

the display mask using a pair of fine-tipped tweezers.

2. Remove two M2.5x6 black screws and four M2x5

silver flat head screws securing the display mask.

3. There are 20 latches securing the display mask.

Carefully insert your fingers between the mask and the

LCD panel and pry open the latches starting from the

six top latches, to the five latches on each right

and left sides, ending with the bottom seven latches.

Mask seals

Rubber seals

LCD/

FL harness

FL inverter board

M2x3

silver

screws

M2x3

silver

screws

FL cable

M2x4 silver screw

LCD module assy

M2x5 silver screws

TE2000