Laptop User Manual

User’s Manual 3-46
DisplayPort
Some models are equipped with a DisplayPort. This port enables you to
connect an external monitor.
Connecting the DisplayPort
1. Plug one end of the DisplayPort cable into the DisplayPort on your
external monitor.
2. Turn on the external monitor.
3. Plug the other end of the DisplayPort cable into the DisplayPort on your
computer.
eSATA (External Serial ATA) devices
An device corresponding to eSATA function can be connected to the
eSATA/USB combo port on the computer.
720 by 576, True Color (32bit), 50Herts 576p
720 by 480, True Color (32bit), 60Herts 480p
Display mode at List All Modes HD Format
The above display mode is a typical HDMI display mode. The selectable
display modes will vary for different HDMI monitors.
■ As the port operation of all external monitors have not been confirmed,
some monitors may not function properly.
■ When you change the display output device by hot key like FN + F5, the
playback device may not switch automatically. In this case, in order to
set the playback device to the same device as the display output
device, please adjust the playback device manually by the following
steps:
a. Click Start -> Control Panel -> Hardware and Sound -> Sound.
b. In the Playback tab, select the playback device which you want to
switch to.
c. To use the internal speakers on your computer, select Speakers. To
use the television or the external monitor that you have connected
to the computer, select a different playback device.
d. Click the Set Default button.
e. Click OK to close the Sound dialog.