Laptop User Manual

Getting Started

Turning off the computer

To connect a printer to your computer:

1 Connect the printer cable to the printer and then connect the

other end to one of the computer’s USB ports.

2 Plug the printer’s power cable into a live AC outlet.

Setting up a printer

Some printers require a specific installation process. Refer to your

printer installation guide for instructions before completing the

following procedure.

If your printer does not support Plug and Play, follow these steps to

set it up for the first time. You only need to set up the printer once.

1 Click Start, Control Panel, Hardware and Sound, and then

under Devices and Printers, click Add a printer.

The Add Printer Wizard appears.

(Sample Image) Add Printer Wizard

2 Follow the on-screen instructions to set up your printer.

Turning off the computer

Pressing the power button before shutting down the Windows

operating system could cause you to lose your work. Make sure the

system indicator panel’s storage drive light and the drive in-use light

are off. If you turn off the power while a disk/disc is being accessed,

you may lose data or damage the disk/disc and/or drive.

NOTE