Laptop User Manual

Getting Started

Using external display devices

Directing the display output when you turn on the computer

Once you have connected an external display device, you can

choose to use the internal display only, the external device only, or

both simultaneously.

Some modes are only available with the appropriate device attached

and turned on.

The quickest way to change the display output settings is to use the

display hot key (

Fn + F5):

1 Press

Fn and F5 simultaneously.

2 While holding down

Fn, press F5 repeatedly until the setting

you want takes effect. Briefly pause each time you press the

key to allow time for the display to change.

This hot key cycles through the settings in the following order

(the last two options are available if an external monitor is

connected):

❖ Built-in display only

❖ Built-in display and external monitor simultaneously

❖ External monitor only

❖ TV (or other external video device) only

❖ External monitor and TV simultaneously

❖ Built-in display and TV (or other external video device)

simultaneously

❖ Built-in display and external monitor (extended desktop)

❖ Built-in display and TV (extended desktop)

❖ External monitor and TV (extended desktop)

❖ Swap-Switch primary display between internal display

and external monitor when using extended desktop

(Sample Image) Display options window

NOTE