Laptop User Manual

Getting Started

Adding memory (optional)

If your system has the memory modules stacked on top of one

another, you must remove the top module first before

removing/installing the bottom module.

For this model Slot A is the bottom slot. Slot B is the top slot. If only

one memory module is to be installed, it must be installed in Slot A.

11 Pick up the memory module by its sides, avoiding any contact

with its connector. Position the module toward the socket,

aligning the connector’s notch with the matching key in the

socket.

(Sample Illustration) Aligning the memory module with the socket

12 Firmly press the memory module into the memory slot’s socket

at approximately a 30-degree angle (to the horizontal surface

of the computer).

(Sample Illustration) Inserting the memory module into the socket

NOTE

latch

key

notch

connector