Personal Computer User Manual

4 Replacement Procedures 4.34 TFT FL (Model 15.0 UXGA SHARP LQ150U1LW13)

4-158 Satellite Pro M10 Series Maintenance Manual (960-431)

14. Turn the backlight unit right side up.

15. Remove three strips of shield tape, the optical sheet, the upper lens sheet, the lower

lens sheet, the lower diffuser sheet and the light guide sheet. Be careful not to damage

or stain the sheets because they are reused. Dispose of the removed shield tape.

Shield tape

Optical sheet

Upper lens sheet

Lower lens sheet

Lower diffuser sheet

Light guide sheet

Figure 4-134 Removing the sheets

16. Turn the backlight unit upside down.

17. Gently remove the FL taking care not to damage it.

Frame

Figure 4-135 Removing the FL

NOTE: Be careful not to crease the reflective sheet when you remove the FL assembly.