Manual

9. Loosen the screw securing the memory module cover in place -
please note that the screw is attached to the cover in order to prevent
it from being lost.
Figure 4-17 Removing the memory module cover (1)
1
2
1. screw 2. Memory module cover
Product appearance depends on the model you purchased.
10. Removing the memory module slot C/D cover.
Figure 4-18 Removing the memory module cover (2)
1
1. Memory module cover
Product appearance depends on the model you purchased.
11. Follow this procedure to install or remove a memory module:
Install procedure: Align the notch of the memory module with that of
the memory slot and gently insert the module into the slot at about a
30 degree angle before holding it down until the latches on either side
snap into place.
User's Manual
4-41