Operation Manual

Getting Started

Using external display devices

3 Turn on the external device.

4 Set the display mode by pressing

Fn + F5, or by

configuring the Display Properties settings.

Directing the display output when you turn on the computer

Once you have connected an external display device, you can

choose to use the internal display only, the external device

only, or both simultaneously. The quickest way to change the

display output settings is to use the display hot key (

Fn + F5):

1 Press

Fn and F5 simultaneously.

2 While holding down

Fn, press F5 repeatedly until the

setting you want takes effect.

This hot key cycles through the settings in the following

order:

❖ Built-in display only

❖ Built-in display and external monitor simultaneously

❖ External monitor only

❖ TV only

3 Release the

Fn key.

TECHNICAL NOTE: You can also change these settings using

the Display Properties Box.

Set the option for the video controller by clicking Start, then

Control Panel and Display. Choose the Settings tab, click the

Advanced button, select Display Device, select the applicable

Monitor type, and click Apply or OK.