Manualshelf

Personal Computer User Manual

ManualsBrandsToshiba ManualsDesktopTECRA
331332333334335336337338339340
4.32 LCD harness 4 Replacement Procedures
4. Remove the LCD harness from the guides and pass the LCD harness through the
hole of the hinge.
LCD harness
Hole
Guide
Guide
Figure 4-63 Removing the LCD harness (2)
Installing the LCD harness
To install the LCD harness, follow the steps below and refer to Figure 4-61 to 4-63.
1. Pass the LCD harness through the hole of the hinge and arrange the LCD harness
under the guides.
2. Set the harness holder L to the holes of the guides and slide the harness holder L
until the hook is engaged.
3. Turn the cover assembly face up.
4. Arrange the LCD harness under the guide and secure it with the insulator.
TECRA M10 Maintenance Manual (960-685) [CONFIDENTIAL] 4-103