Two-Color Printer Owner's Manual

Appendix 5 System Mode
93
Making Positional Adjustments
When “<2> PARAMETER SET” appears, press the PAUSE key.
Press the PAUSE key. Adjust the print start position.
After selecting the value, press the PAUSE key.
Adjust the cut position.
After selecting the value, press the PAUSE key.
Adjust the distance of back feed.
After selecting the value, press the PAUSE key.
Adjust the print stop position.
After selecting the value, press the PAUSE key.
POSITION
Print Start Position (-30.0mm to +10.0mm)
+0.0mm
Print Start Position
Print Start Position
Print Start Position
Media Feed Direction
One Label
One Label
One Label
+3.0mm
-3.0mm
+0.0mm
-3.0mm
+3.0mm
Cut Position
Cut Position
Cut Position
Media Feed Direction
FEED ADJ.+10.0mm
CUT ADJ. +11.0mm
Cut Position (-20.0mm to +20.0m)
Back Feed Distance (-9.9mm to +9.9mm)
BACK ADJ. +1.5mm
Print Stop Position (-30.0mm to +300.00mm)
+0.0mm
+3.0mm
-3.0mm
Print Start Position
(Home Position after Feed)
Print Start Position
(Home Position after Back Feed)
Media Feed Direction
Print Start Position
(Home Position after Back Feed)
STOP ADJ+288.0mm
+0.0mm
+3.0mm
-3.0mm
Print Stop Position
(When printing completes)
Print Stop Position
(When printing completes)
Media Feed Direction
Print Stop Position
(When printing completes)
Note:
See A5.7.3 for an example of the
cutting operation.
A5.4 Parameter
Setting (Cont.)