User's Manual Notebook Computer TE2300

TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
4-6
TOSHIBA TE2300
Using optical media drives
The text and illustrations in this section refer primarily to the DVD-ROM
drive. However, operation is the same for the CD-RW/DVD-ROM and
DVD Multi drives. The full-size drive provides high-performance execution
of CD/DVD-ROM-based programs. You can run either 12 cm (4.72") or
8 cm (3.15") CD/DVDs without an adaptor. An ATAPI interface controller
is used for CD/DVD-ROM operation. When the computer is accessing a
CD/DVD-ROM, an indicator on the drive glows and the Slim Select Bay
indicator glows.
Use the WinDVD 4 application to view DVD-Video discs.
If you have a CD-RW/DVD-ROM drive, refer also to the Writing CDs
section for precautions on writing to CDs.
Loading discs
To load CD/DVDs, follow the steps below and refer to next figures.
1. a. When the power is on, press the DVD-ROM eject button to open the
drawer slightly.
Pressing the DVD-ROM eject button
1. b. Pressing the eject button will not open the drawer when the DVD-
ROM drive’s power is off. If the power is off, you can open the
drawer by inserting a slender object (about 15 mm) such as a
straightened paper clip into the eject hole just to the right of the
eject button.