User's Manual Notebook Computer TE2300

TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
4-2
TOSHIBA TE2300
■ You touch the AccuPoint II during power-up.
■ You apply constant, soft pressure during power-up.
■ There is a sudden temperature change.
■ Strong stress is applied to the AccuPoint II.
If an error message appears, reboot the computer. If an error message
does not appear, wait a moment for the pointer to stop, then continue
operation.
Replacing the cap
The AccuPoint II cap is an expendable item that should be replaced after
prolonged use.
1. To remove the AccuPoint II cap, firmly grasp the cap and pull it
straight up.
Removing the AccuPoint II cap
2. Position a new cap on the peg and press it into place.
The peg is square, so be careful to align the cap’s square hole with the
peg.
PEG
A
CCUPOINT II CAP