Operation Manual

31
Operations
TDP-ET20 DVD playback
About
The icons on the heading bar show the playable discs for the function
described under that heading.
You can use this function with DVD video discs.
You can use this function with Video CDs.
You can use this function with Audio CDs and CD-R/RW discs.
Setup the DVD player.
You can setup the DVD player setting.
(1) Press [DVD SETUP] key on the remote control when DVD input is selected.
DVD setup menu will appear.
(2) In DVD setup menu, there are 2 pages. One is SYSTEM SETUP page and the other
is LANGUAGE SETUP page. Press
key to select page and press key to
select each setup item.
(3) To exit from DVD setup menu, press
key to select EXIT SETUP or [DVD
SETUP] key again.
PASSWORD (For Parental control)
Unlock the password lock
To change parental level or password, it is required to enter password (4 digit security
code) for unlocking.
(1) Select the PASSWORD in SYSTEM SETUP page and press
or key.
(2) Press number key to input current password and press
key(If the password has not
been set yet after you purchase this projector, it is ‘0000’).
(3) If correct password is entered,
will appear. If is still displayed, it means en-
tered password is incorrect. Please enter the correct password again.
Enter a new password
New password can be set to replace the default password.
(1) Select PASSWORD in SYSTEM SETUP page and press
or key.
(2) Please make sure
is displayed. If is displayed, it is required to unlock the
password lock.
(3) Press number button to input new password and press
key. Be sure to remember
this number.
(4) Select EXIT SETUP and press
key to save a new password.
If you forget the password, you can erase your current password by entering password as
‘1048’.