User Guide

Real Time Clock

Problem Procedure

The BIOS setting

and system date/

time are lost.

The charge in the Real Time Clock (RTC) battery

has run out - you will need to set the date and time

in the BIOS setup application by using the

following steps:

Turn off the computer.

2. Press and hold on the Volume down button

and then slide the Power switch. When the

TOSHIBA Leading Innovation >>> logo

screen appears - the BIOS setup application

will load.

3. Set the date in the System Date field.

4. Set the time in the System Time field.

5. Follow the on-screen instructions.

Internal display panel

Apparent computer's display panel problems may be related to the

computer's setup and configuration - please refer to the HW Setup section

in Chapter 4, Utilities & Advanced Usage, for further information.

Problem Procedure

Markings appear on

the computer's

display panel.

These marks may have come from contact with the

touch screen. You should try to remove the marks

by gently wiping the display panel with a clean dry

cloth or, if this fails, with a good quality LCD screen

cleaner. In this latter instance you should always

follow the instructions with the screen cleaner and

always ensure you let the display panel dry

properly before closing it.

Solid State Drive

Problem Procedure

Computer does not

boot from Solid State

Drive

Check the Boot Priority setting within the

TOSHIBA HW Setup utility - please refer to the

Boot Setting section in Chapter 4, Utilities &

Advanced Usage for further information.

TOSHIBA WT200

User's Manual 6-