Owner manual

English - 7 -

English

Fitting or Removing the pedestal stand

(1) Carefully lay the front of the unit face down on a at, cushioned surface with the stand hanging over the edge.

(2) To t the stand use the screws supplied.

(3) Remove the screws xing the pedestal stand

(4) After the screws are removed, hold the pedestal stand in place, then remove the pedestal stand and the

plastic moulding from the TV.

Note: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel.

For 48T544*DG model

When using a Wall Bracket

Please use a wall bracket appropriate for the size and weight of the LCD TV and two people are required for

the installation.

(1) Unplug and remove any cables and/or other component connectors from the rear of the TV.

(2) Carefully lay the front of the unit face down on a at, cushioned surface such as a quilt or blanket.

(3) Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate

bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the

wall bracket.