User Guide

10
Strata CTX DKT3000/2000-Series Digital Telephone October 2002
Important - Read First The Basics
Which Outgoing/Incoming Call Features Do I Have?
Check mark here which outgoing/incoming features you have on your system.
❐ Automatic Line Selection (ALS): When making outgoing calls, you have ALS if when you lift
the handset or press
Spkr you hear dial tone and the Line Light Emitting Diode (LED) lights
steady green. The LCD displays the station number and the seized outside line.
❐
Ringing Line Preference: You answer an incoming line ringing your station by lifting the
handset or pressing
Spkr. You do not have to press an extension button to answer.
❐ Tone Signalling: Internal incoming call – you hear successive ring tones, then lift the handset or
press
Spkr to answer the call.
❐ Voice First Signalling: Internal incoming call – your telephone does not ring; instead you hear a
long tone, then the caller’s voice. Talk in the direction of your telephone, or answer the call as you
normally would by lifting the handset or pressing
Spkr.
❐
Switching Signalling: Check with your CTX System Administrator to see if you have the ability
to change between Tone and Voice Signalling on a call-by-call basis. If you do, you can press
2
after dialling an internal telephone number to change the signalling.
❐ Hot Dialling: If your telephone is programmed for “hot dialling,” you do not have to press
Spkr
or lift the handset before dialling internal or external speakerphone calls. When you dial a
number, the speakerphone automatically turns on and the Spkr and Mic LEDs light.