Operation Manual

User’s Manual EN-13
STOR.E D10
If you are using a USB connection
To turn off/disconnect your STOR.E D10 if you are using a USB
connection:
1. Wait until all read/write activity stops (the power/drive in-use light
will stop flashing).
2. Double-click the Safely Remove Hardware icon in the
Notification area/System tray of your Windows
®
desktop.
(Sample Image) The Safely Remove Hardware icon in the
Notification area/System tray
3. Select USB Mass Storage Device and then click Stop.
4. Select Toshiba HDD and then click OK.
A message displays indicating it is safe to remove the device
from your computer.
5. Turn off the drive and/or disconnect the USB cable connecting
the drive to your computer.
If you are using an eSATA connection
To turn off/disconnect your STOR.E D10 if you are using an
eSATA connection:
1. Wait until all read/write activity stops (the power/drive in-use light
will stop flashing).
2. Shut down your computer.
3. Turn off the drive by pressing the power button on the back of
the drive.
4. Disconnect the eSATA cable.
The procedure for safely removing a hardware device may
vary depending on your computer's operating system. Refer to
the documentation provided with your operating system if the
above procedure is not applicable to your system.
NOTE
When you shut down your computer, your STOR.E D10
unmounts from the system automatically. You do not need to
manually unmount it. Simply wait until your computer shuts
down before disconnecting the cable.
NOTE