User Guide

Playing a Disc
15
Introduction
Press the ON/STANDBY button.
Press OPEN/CLOSE.
The disc tray opens.
The DVD video player turns on.
Place the disc on the disc tray.
With the playback
side down
• There are two different disc sizes. Place
the disc in the correct guide on the disc
tray. If the disc is out of the guide, it may
damage the disc and cause the DVD
video player to malfunction.
• Do not place a disc which is unplayable in
this DVD video player.
This section shows you the basics on how to play a disc.
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
Preparations
• When you want to view a disc, turn on the TV and select the video input connected to the DVD video player.
• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the
input connected to the DVD video player.
1
2
3
Basic playback
Press OPEN/CLOSE to close the disc tray.
If
you insert a DVD video disc that contains a
top
menu, a menu may appear. Use the / /
/ to
select the title you want to view,
then press
ENTER to start playback.
• You may need to press the TOP MENU or
MENU
button to display disc menu
(depending
on the actual DVD video disc.).
4
Notes
• If the disc tray is holding a disc you have already
played, playback will begin from the location where
you last stopped. For resuming playback, see page 16.
• Some video CD are recorded with PBC (Playback
Control), a menu with recorded contents may
appear on the TV if you have turned the PBC On.
You can make your selection according to its PBC
menu. Press the PBC button on the remote control
to turn PBC On or Off anytime during Video CD
playback. When switching from PBC Off to PBC
On mode, playback will start from the beginning of
the disc.
To start playback in the stop mode
Press PL
AY.
Playback starts.