Laptop User Manual

Getting Started

Adding memory (optional)

13 Pick up the memory module by its sides, avoiding any contact

with its connector. Position the module toward the socket,

aligning the connector’s notch with the matching key in the

socket.

(Sample Illustration) Aligning the memory module with the socket

14 Firmly press the memory module into the memory slot’s socket

at approximately a 30-degree angle (to the horizontal surface

of the computer).

(Sample Illustration) Inserting the memory module into the socket

15 Once the module’s connector is fully inserted into the socket,

press downward on the top edge of the module to seat the

module into the latches at the sides of the socket. These latches

should “snap” into place securely with the corresponding

cutouts in the side of the module. If the latches and cutouts do

not line up correctly, repeat steps 14-15.

latch

key

notch

connector