Laptop User Manual

Getting Started

Adding memory (optional)

For this model, Slot A is the bottom slot. Slot B is the top slot. If only

one memory module is to be installed, it must be installed in Slot A.

11 Pick up the memory module by its sides, avoiding any contact

with its connector. Position the module toward the socket,

aligning the connector’s notch with the matching key in the

socket.

(Sample Illustration) Aligning the memory module with the socket

12 Firmly press the memory module into the memory slot’s socket

at approximately a 30-degree angle (to the horizontal surface

of the computer).

(Sample Illustration) Inserting the memory module into the socket

13 Once the module’s connector is fully inserted into the socket,

press downward on the top edge of the module to seat the

module into the latches at the sides of the socket. These latches

should “snap” into place securely with the corresponding

NOTE

latch

key

notch

connector